High table Mdf Italia Tense Material – H 90 cm / H 35.43″

Description

The important technological innovation it incorporates, combined with the tensioning capacity of the components makes it possible to build tops in large sizes which remain perfectly flat and also extremely light.
Top, edges and legs covered with a sheet of material in a thickness of about 3mm.
– Marble, this particular finish, reconstructed marble, is made starting with marble dust that has been mixed with a filler and is then spread manually over the entire surface of the coffee table.
Top, edges and legs are covered with a sheet of material in a thickness of about 3mm. Finishes: black ebony and white Carrara marble.
– Fine wood: in Italian walnut, transparent acrylic finish. Edges and legs covered in 2 mm-thick cut walnut, processed with sawed effect (series of irregular cuts of different depths).
Top covered in 2 mm-thick wood, fine smooth finish with variable slats which give the surface a distinctive array of shades, exalting the natural characteristics of the wood and raw material.
– Diamond (glossy red): an innovative material processing and stratification technique that showcases the top, its qualities and the depth of the colour.
The material stratification process is based on a special mass-coloured concrete resin around 3 mm in thickness which is expertly combined with a binder and applied by hand all over the top in a deliberately irregular and non-uniform way.
The subsequent combination of the black patina, rough, dynamic and with lots of shadowy areas, and the surface finish consisting of various layers of polyester, extremely thick, smooth and very glossy, creates an original lens effect notable for its colour and depth.
Surface, edges and legs with application of 3 mm-thick material composed of a mass-coloured cement base and surface finish in glossy polyester.
The 35mm thick top is a load-bearing composite board built with an internal frame consisting of either aluminium profiles and polystyrene filler (wood and stone) or an acrylic resin honeycomb and two outer layers of aluminium (brass). 35x35mm steel legs with internal structural tie-rod.

High table
Material: Stone – Wood – Marble – Brass

Dimensions:
W 140 x D 80 x H 90 cm / W 55.12″ x D 31.50″ x H 35.43″
W 160 x D 80 x H 90 cm / W 62.99″ x D 31.50″ x H 35.43″
W 180 x D 80 x H 90 cm / W 70.87″ x D 31.50″ x H 35.43″
W 200 x D 80 x H 90 cm / W 78.74″ x D 31.50″ x H 35.43″
W 160 x D 90 x H 90 cm / W 62.99″ x D 35.43″ x H 35.43″
W 180 x D 90 x H 90 cm / W 70.87″ x D 35.43″ x H 35.43″
W 200 x D 90 x H 90 cm / W 78.74″ x D 35.43″ x H 35.43″
W 220 x D 90 x H 90 cm / W 86.61″ x D 35.43″ x H 35.43″
W 240 x D 90 x H 90 cm / W 94.49″ x D 35.43″ x H 35.43″
W 200 x D 100 x H 90 cm / W 78.74″ x D 39.37″ x H 35.43″
W 220 x D 100 x H 90 cm / W 86.61″ x D 39.37″ x H 35.43″
W 240 x D 100 x H 90 cm / W 94.49″ x D 39.37″ x H 35.43″
W 260 x D 100 x H 90 cm / W 102.36″ x D 39.37″ x H 35.43″
W 280 x D 100 x H 90 cm / W 110.24″ x D 39.37″ x H 35.43″
W 300 x D 100 x H 90 cm / W 118.11″ x D 39.37″ x H 35.43″
W 240 x D 120 x H 90 cm / W 94.49″ x D 47.24″ x H 35.43″
W 260 x D 120 x H 90 cm / W 102.36″ x D 47.24″ x H 35.43″
W 280 x D 120 x H 90 cm / W 110.24″ x D 47.24″ x H 35.43″
W 300 x D 120 x H 90 cm / W 118.11″ x D 47.24″ x H 35.43″
W 200 x D 150 x H 90 cm / W 78.74″ x D 59.06″ x H 35.43″
W 240 x D 150 x H 90 cm / W 94.49″ x D 59.06″ x H 35.43″
W 300 x D 150 x H 90 cm / W 118.11″ x D 59.06″ x H 35.43″
W 80 x D 80 x H 90 cm / W 31.50″ x D 31.50″ x H 35.43″
W 90 x D 90 x H 90 cm / W 35.43″ x D 35.43″ x H 35.43″
W 100 x D 100 x H 90 cm / W 39.37″ x D 39.37″ x H 35.43″
W 120 x D 120 x H 90 cm / W 47.24″ x D 47.24″ x H 35.43″
W 150 x D 150 x H 90 cm / W 59.06″ x D 59.06″ x H 35.43″